B2 Spice A/D v4 Standard
B2 Spice A/D v4 Standard uses the same engine and technology as our Professional version. The Standard version has most of the powerful capabilities of the Professional version is at a fraction of the cost.
The limitations of B2 A/D v4 Standard are:
-
5,000+ parts instead of the Professional version's 15,000+ parts
-
a smaller set of simulations: Operating Point, single & dual DC Sweep, Transient & Fourier analysis, AC Sweep, Transfer function, AC & DC sensitivity, .show, .showmod, Distortion, Pole-Zero, and Noise
NO Monte Carlo, Network RF Analysis, and parameter sweeps
See a complete chart listing the differences between all three versions.
Click on one of the features to find out more about the rich features of B2 Spice A/D v4.
- quick, easy, and intuitive schematic entry
- New feature: Animated schematics that display the actual current flow through the circuit and the relative voltage relationships by varying the wire's display color.
- powerful simulations
- PCB export to make your designs a reality
- New feature: export to and import from Eagle, a world leader in PCB software.
- pure digital mode with interactive simulations
- highly flexible and customizable graphs
- netlist capability to access the full power of Spice A/D v4
- 5,000 digital and analog parts
- multiple bit ports and buses
- parameterized subcircuits
- create a part from any circuit
- password protected defects
- shared models
- database editor to import and manage the library of parts
- integrated symbol editor
System Requirements:
- A Pentium class or later processor is required.
- 64Mb RAM minimum
- Windows 98 / 2000 / XP or later is recommended. Fully compatible with Windows Vista and 7.